Hello dear Amigurumi Followers
Today we share one free amigurumi crochet pattern again for you. As you know we share new amigurumi free patterns every day. The main crochets are amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi llama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi lambs, amigurumi bees, amigurumi unicorns, amigurumi dolls, amigurumi foxes, amigurumi penguins, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Legolas Greenleaf.
I want to give you some informations about this pattern ;
Materials and tools:
– Crochet hook 1.7mm and 2.1mm
– Stuffing
– 8mm safety eyes ( but you could also embroider eyes )
– Yarn ( I used lanoso alara) 50%cotton 50%acrylic 50g=160m In colours:
Peach (skin)
Very light yellow/white (hair)
Dark grey (pants, details)
Dark green (jacket)
Black (boots, eye embroidery)
White (eye embroidery)
Beige (arrow and bow details)
Brown (belt and details)
– Needle
– Wire
Abbreviations:
– Sc – single crochet
– MR – magic ring
– Dec – decrease
– Inc – increase
– St, sts – stitch, stitches
– Bobble – yo, put the hook in a stitch, yo, pull through 2 loops on your hook twice, yo and pull through
– Hdc – half double crochet
– Ch – chain
– Sl – slip stitch
– Number in () is the number of sts at the end of each row
LEGS
Hook is 1.7mm.
Work as tight as you can
We are going to make 1 leg and fasten off. Then we need to make second leg and join with first one and continue working on the body.
In Black
R1: sc6 in MR (6)
R2: [sc, inc] x3 (9)
R3: sc5, dec2 (7)
R4 – R5: sc7 (7) (2 rounds)
Change to dark gray
R6-R13: sc7 (7) (8 rounds)
Fo. Repeat to make second leg and then continue to the body.
BODY
R14: sc7, ch3, sc7, sc3 (20)
R15: inc, sc15, inc, sc3 (22)
R16-18: sc22 (22) (3 rounds)
R19: dec, sc15, dec, sc3 (20)
Change to brown
R20: sc20 in BLO (20)
Change to dark green:
R21: sc20 in BLO (20)
R22: sc20 (20)
Before you start stuffing, embroider details on his boots:
Do it on both feet
And then make a small buckle on the belt.
Start stuffing and continue crocheting:
R23: sc2, dec, sc7, dec, sc5, dec (17)
R24: sc2, dec, sc7, dec, sc4 (15)
R25: sc2, dec, sc5, dec, sc2, dec (12)
R26: dec6 (6)
Peach
R27: sc6 (6)
Before we work the head, lets make a skirt:
Work in the FLOs left from R20. Work in rows and ch1 after each row to turn:
R1: sc20 (20) (picture above)
R2: dc, hdc sc16, hdc, dc (20)
R3: hdc2, sc16, hdc2 (20)
R4-5: sc20 (2 rows)
R6: hdc3, sc14, hdc3 (20)
R7: sc20 (20), FO, hide the tail left
This is how it should look like
Now go on with the head:
R28: inc6 (12)
R29: [sc, inc] x6 (18)
R30: [sc2, inc] x6 (24)
R31: [sc3, inc] x6 (30)
R32: [sc4, inc] x6 (36)
R33: sc2, sc18 in FLO, sc16 (36)
R34-R39: sc36 (36) (6 rounds)
Put safety eyes between R35 and R36, 7sts apart
If you want to embroider around the eyes, you can do it now.
Use pins to define the position of the eyes. When you are ready, place the safety eyes.
They might look a bit big at the moment, but later it will look just perfect.
For example, here is how they look with and without embroidery.
Start by placing black and white threads as shown.
Cross them like this.
It should look like this.
Repeat for the other eye.
This is optional, but you can also embroider a nose using some skin colored yarn.
Continue crocheting
R40: [sc4, dec] x6 (30)
R41: [sc3, dec] x6 (24)
R42: [sc2, dec] x6 (18)
R43: [sc, dec] x6 (12)
R44: dec6 (6)
Use a tapestry needle to close the remaining hole
ARMS
Hook is 1.7mm
In peach
R1: sc6 in MR (6)
R2: sc6 (6)
R3: sc5, bobble (6)
Change to brown or black
R4: sc4, dec (5)
R5-6: sc5 (5) (2 rounds)
Change to dark gray
R7-8: sc5 (5) (2 rounds)
Change to dark green
R9-11: sc5 (5) (3 rounds)
Fo and leave a long tail for sewing.
Make 2. Attach arm to the body
While sewing, make sure that the thumbs (bobbles) are pointing forward!
HAIR
With a 1.7mm hook
Use white/very light yellow colour.
Mine was:ch30, turn, sc29 (29) x9
To make sure you get the best result, compare this strand to the body. It should reach dolls waist.
To prevent this (a big curl), try working looser and stretch each strand after you crochet it
And it will look like this.
You will notice that the strands start to curl again after you leave them, but don’t worry. You can stretch them a few more times, but after we sew them on, they will stop curling
Make 9 strands(This should be enough to cover the head with hair. If not, crochet more strands)
Again, you can make more or less strands than I did, just make sure that when you pin the hair like this, there is a lot of space between the hair and the eye
(We are not going to sew the hair here, this is just for the measuring purposes!)
Cut the yarn and leave the wig aside for a second
EARS
We are now going to make a pair of elvish ears, but won’t sew them on yet. We will add them at some point while adding hair. (I will let you know)
These are elvish ears. So, if you think they aren’t pointy enough, you can pinch them. If it is still not pointy, you can ch1 before tr. Working loosely will also help making it the right shape.
R1: in MR: sc, hdc, tr, ch2, sc, cut the yarn. Make 2
Now, sew the hair on:
Pull the tail through the top of each strand
Pull. Make a small knot
Sew the hair on top of the head
Pin each of them down
Then pin the ears 4sts away from the eyes on each side
Readjust the first hair strand to make it look like it has been tucked behind the ear (repeat on the other side as well)
Sew the ear down (repeat on the other side as well)
Then stitch each hair strand to the chin level
(This step is optional) stitch each of the strands together to reduce the bald spots
This is from the front
Now, prepare an additional strand:
ch23, sc2, sl, sc23, sc21, sl in the very first ch
Sew it above his forehead
Pin it above the ear
And then leave the rest hanging
Sew it down.
Additionally, you can add some braids if you like:
(These are just some long chains)
Sew them like this:
Tie the braids like this and hide the tails
QUIVER
Use brown yarn and a 1.7mm hook
R1: sc6 in MR (6)
R2: [sc, inc] x3 (9)
R3: [sc2, inc] x3 (12)
R4-9: sc12 (12) (6 rounds)
To make the shoulder strap, ch25
And then sl in the bottom
Cut the yarn and hide the tail
Put it over his shoulder:
BOW AND ARROW
These pieces are made out of wire, but you will also need some beige, some brown and some grey yarn The wire you will use for the bow should be around the height of your doll.
The wire for the arrow should be around 7cm (a bit less than 3 inches) First, bend a long piece of wire like this:
Then, use beige yarn and tie it like this:
And on the other side as well:
Bend the wire to secure the yarn:
If you want, you can put a few drops of glue to secure the yarn even more I glue the tails down like this:
Then wrap the rest of it in brown yarn
The bow is done!
To make the arrow, use a shorter wire and stretch it out like so:
You can either wrap it or crochet over it; I did a couple of sc
Secure the ends by bending the wire, just like you did with the bow
Decorate the arrow. I just wrapped the ends with yarn
Done!
Congratulations, your Legolas is done! Remember to tag me if you post him in social media!
More Amigurumi Doll Ideas: