Materials
A crochet, I use a crochet size B-1 (2.25 mm), you can use another size depending on your yarn. Use a
smaller hook if you crochet loosely.
• Tapestry needle
• Pair of scissors
• A pair of 4.5 mm safety eyes
• Stitch markers
• Polyester fiberfill stuffing
• Stick to help you stuff small pieces
• Pins
• A small piece of light pink felt for the cheeks
• Textile adhesive to glue felt
• Yarn, I give you in brackets the references I used:
Brown (Scheepjes Catona 503, Hazelnut)
Caramel (Scheepjes Catona 179, Topaz)
Beige (Scheepjes Catona 404, English tea)
Green (Scheepjes Catona 392, Lime juice)
Red (Scheepjes Catona 115, Hot red)

Abbreviations
MR – Amigurumi Magic ring
sc : Single Crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st or Slst: Slip Stitch
ch : Chain
tch: Turnin chain crochet
FLO : Crochet into front loops only
BLO : Crochet into back loops only

Amigurumi Cute Crochet Tortoise Free Pattern:

SHELL
Use brown yarn:
r.1: 6sc in a magic ring (6)
r.2: 6inc (12)
r.3: [1sc, 1inc] x6 (18)
r.4: 1sc, 1inc, [2sc, 1inc] x5, 1sc (24)
r.5: [3sc, 1inc] x6 (30)
r.6: 2sc, 1inc, [4sc, 1inc] x5, 2sc (36)
r.7: [5sc, 1inc] x6 (42)
r.8: 3sc, 1inc, [6sc, 1inc] x5, 3sc (48)
r.9-16 (8r.): 48sc (48)
Break yarn and fasten off invisibly (→photo 01).

Break brown yarn and continue with caramel yarn:
r.17: Join drawing caramel yarn through the front loop of one stitch of round 16 (→photo 02), 1ch, 1sc in the same loop, work this round through flo, 47sc (48) (→photo 03)

Note: If you have a slightly larger hook, you can use it to crochet the edge of the shell. Personally, I used a 2.75 mm hook here, instead of 2.25 mm for the rest of the turtle. This is not essential.
r.18: 48 twisted sc (→technique below) (48) (→photo 04) You can replace the twisted single crochet stitches with crab stitches, if you prefer.1slst in the 1st stitch, fasten off and weave in the yarn ends.

LEGS X4
Use green yarn:
r.1: 6sc in a magic ring (6)
r.2: 2inc, 3inc/hdc, 1inc (12)
r.3: Work this round through blo, 12sc (12)
r.4: 4sc, 3dec, 2sc (9)
r.5: 2sc, 1inc, 1sc, 1sc flo, 1inc flo, 1sc flo, 1sc, 1inc (12)
Stuff the foot as firmly as possible without stretching the stitches (→photo 05).
r.6: 1dec, 5sc, 1inc, 4sc (12)
r.7: 1dec, 4sc, 1inc, 5sc (12)
r.8: 1inc, 5sc, 1dec, 4sc (12)
Finish stuffing the leg firmly.
Notes: On each leg, add a small piece of paper with numbers so that you don’t lose the thread.

Leg #1: Place a marker in the 10th stitch, 1slst in the 1st stitch. Break yarn and fasten off invisibly.
Leg #2: Crochet an additional sc and place a marker in this stitch, 1slst in the next stitch. Break yarn and fasten off invisibly.
Leg #3: Place a marker in the 4th stitch, 1slst in the 1st stitch. Break yarn and fasten off invisibly.
Leg #4: Place a marker in the 7th stitch, 1slst in the 1st stitch. Break yarn and fasten off invisibly.

BELLY
Use beige yarn:
r.1: 6sc in a magic ring (6)
r.2: 6inc (12)
r.3: [1sc, 1inc] x6 (18)
r.4: 1sc, 1inc, [2sc, 1inc] x5, 1sc (24)
In the next round, you are going to connect the inside of the legs to the belly.
r.5: Take leg #1, insert your crochet in the marked stitch of the leg, from inside to outside and in the next stitch of the belly (→photo 07), work 1sc through these two layers. Continue crocheting 2sc through the next stitches of the leg and the next stitches of the belly. 3sc around the belly (→photo 08), 3sc crocheting at the same time in the leg #2 and in the belly (for this leg and the following ones, proceed as for the leg #1), 3sc around the belly, crocheting at the same time in the leg #3 and in the belly, 3sc around the belly, 3sc crocheting at the same time in the leg #4 and in the belly, 3sc around the belly (24) (→photos 09 and 10) Do not break yarn, continue with the next page.

The last round is crocheted around the outside of the legs and the belly (→photo 11). Do not crochet into the 12sc which joined the legs in the previous round (the stitches crocheted through the legs and the belly).
r.6: 9sc in the remaining stitches of the leg #1 (→photo 12), 3sc around the belly (→photo 13), 9sc in the remaining stitches of the leg #2, 3sc around the belly, 9sc in the remaining stitches of the leg #3, 3sc around the belly, 9sc in the remaining stitches of the leg #4, 3sc around the belly (48)
Fasten off, leaving a long tail for sewing (→photo 14).

Sew the carapace to the legs using the back loops of round 16 of the carapace and the stitches of round 6 of the belly (→photo 15), stuff firmly before finish the sewing. (→photo 16)

HEAD
Use red yarn:
r.1: 6sc in a magic ring (6)
r.2: 6inc (12)
r.3: [1sc, 1inc] x6 (18)
r.4: 17sc, 1slst, 3ch, start in the 2nd stitch from hook, 2slst; 1slst in the stitch at the base of the chain, 3ch, start in the 2nd stitch from hook, 2slst, 1slst in the stitch at the base of the chain.
Break yarn and fasten off invisibly (→photo 17).
Continue using green yarn:
r.5: Join drawing green yarn through the back loop of the stitch with the knot of the bandana (→photos 18 and 19), 1ch, 1sc in the same back loop, 1sc in the back loop of the fake stitch created by the invisible fastener (→photo 20), continue crocheting in round 4 through flo, 16sc (18)

Continue crocheting in a spiral.
r.6: [5sc, 1inc] x3 (21)
r.7-8 (2r.): 21sc (21)
Put a pin in the middle of the head between rounds 6 and 7 (→photo 21). On each side, count 2 stitches then insert and fix the eyes in the 3rd stitch (→photo 22).
r.9: 6sc, 5dec, 5sc (16)
r.10: 4sc, 4dec, 4sc (12)
Stuff the head firmly.
r.11-14 (4r.): 12sc (12)
r.15: 5sc, 3dec, 1sc (9)
r.16-18 (3r.): 9sc (9)
Stuff the top of the neck firmly and the bottom softly.
r.19: 3sc, 3dec (6) (→photo 23)

Fasten off, leaving a long tail for sewing, then close the remaining stitches through front loops.
Pin the head on the shell, it must be centered between the two front legs and the bottom of the neck must fall between the caramel and the beige rounds. Sew following the dotted line (→photo 24), only sew on the back of the neck, so that these stitches are not seen on the outside.

TAIL
Use green yarn to make a foundation chain of 6ch:
r.1: Start in the 2nd stitch from hook, 1slst 4sc (5) (→photo 23)
Fasten off, leaving a long tail for sewing.
Sew the tail to the shell, it must be centered between the two back legs and it must fall between the caramel and the beige rounds (→photo 24).

To finish
→ Cut two small circles of pink felt, approximately 7 mm in diameter. Glue them underneath the eyes (→photo 25).

→ You can cut out and attach the number sign onto your turtle’s shell, or create a custom bib for him!

More Amigurumi Turtle Ideas:

Amigurumi Cute Crochet Tortoise Free Pattern-2 yazısı ilk önce FREE AMİGURUMİ CROCHET üzerinde ortaya çıktı.

For work you will need:
Yarn Pekhorka “Children’s novelty”
Hook 2.5 mm
Safety eyes or half beads
Needle and scissors
Holofiber

Abbreviations
sc : Single Crochet
inc : Increase
dec : Decrease
tr : Triple Crochet/ Treble Crochet
st: Stitch
dc : Double Crochet
hdc: Half Double Crochet
sl-st : Slip Stitch
ch : Chain
..in : make increase into same stitch as many as the number which is given in front of “inc” abbreviation (exp; 3inc, 4inc..).
FLO : Crochet into front loops only
BLO : Crochet into back loops only
BL : Bobble Stitch – do 5dc all in the same stitch and then yarn over and pull through all the loops on your hook (the original loop + 1 loop for each partially completed dc).

Amigurumi Ninja Turtle Free Pattern:

Body
We knit with green yarn.
1 Row: sc in MR (6)
2 Row: 6 inc (12)
3 Row: (1 sc, inc)*6 (18)
4 Row: (2 sc, inc)*6 (24)
5 Row: (3 sc, inc)*6 (30)
6 Row: (4 sc, inc)*6 (36)
7 Row: (5 sc, inc)*6 (42)
8-17 Row: 42 sc (42)
18 Row: (5 sc, dec)*6 (36)
19 Row: (4 sc, dec)*6 (30)
20 Row: (3 sc, dec)*6 (24)
21 Row: (2 sc, dec)*6 (18)
22 Row: (1 sc, inc)*6 (12)
23 Row: 6 dec (6)
Close the hole, cut the thread.

Head
We knit with green yarn.
1 Row: 7 sc in MR (7)
2 Row: 7 inc (14)
3 Row: (1 sc, inc)*7 (21)
4 Row: (2 sc, inc)*7 (28)
5 Row: (3 sc , inc)*7 (35)
6 Row: (4 sc, inc)**7 (42)
7 Row: (6 sc, inc)*6 (48)
8 Row: (7 sc, inc)*6 (54)
9 Row: (8 sc, inc)*6 (60)
10-18 Row: 60 sc (60)
19 Row: (8 sc, dec)*6 (54)
20 Row: (7 sc, dec)6 (48)
21 Row: (6 sc, dec)*6 (42)
22 Row: (5 sc, dec)*6 (36)
23 Row: (4 sc, dec) 6 (30)
24 Row: (3 sc, dec) 6 (24)
25 Row: (2 sc, dec)6 (18)
26 Row: (1 sc, inc)*6 (12)
27 Row: 6 dec (6)

Blindfold
We knit in the selected color (Leonardo – blue, Donatello – purple, Michelangelo – orange, Raphael – red).
The headband is knitted with swivel Rows with lifting loops.
1 Row: 72 ch., 1 lifting loop(73)
2-4 Row: 72 sc (72)

Hands (2 times.)
We knit with green yarn.
1 Row: 5 sc in MR (5)
2 Row: 5 inc (10)
3 Row: (inc, 4 sc)*2 (12)
4-5 Row: 12 sc (12)
6 Row: (dec, 4 sc)*2 (10)
7-9 Row: 10 sc (10)
10 Row: Fold in half, knit 5 sc on two sides (5)
11 Row: lifting loop, expand, 5 sc (5)

Legs (2 times)
1 Row: 6 sc in MR (6)
2 Row: 6 inc (12)
3 Row: (1 sc, inc)*6 (18)
4 Row: 18 sc embossed purl sc (18)
5-6 Row: 18 sc (18)
7 Row: (4 sc, dec)*3 (15)
8 Row: (3 sc, dec)*3 (12)
9-11 Row: 12 sc (12)
12 Row: (1 sc, dec)*4 (8)
13 Row: 8 sc
14 Row: Fold in half, knit 4 sc on two sides (4)

Shell (belly)
We knit with yellow yarn in rotary rows.
1 Row: 7 ch, 1 lifting loop (8)
2 Row: 7 sc (7)
3 Row: inc, 5 sc, inc (9)
4 Row: inc, 7 sc, inc (11)
5-11 Row: 11 sc (11)
12 Row: dec, 7 sc , dec (9)
13 Row: dec, 5 sc, dec (7)
Tie in a circle. Leave the thread for sewing.

Shell (back)
Knit with brown yarn.
Tie 7 hexagons according to the pattern:
1 Row: 6 sc in MR (6)
2 Row: 6 inc (12)
3 Row: (1 sc, inc)*6 (10)
Sew – one in the center, six around. Tie two Rows in a circle.

Assembly
Sew the bandage to the head at eye level, sew the eyes over the bandage. Tie the ends of the bandage in a knot at the back of the head.
Sew the head, arms and legs to the body.
Sew a shell (belly) on the stomach. Sew a shell (back) on the back, adding a little filler. Embroider eyebrows and mouth if desired.

More Amigurumi Turtle Ideas:

Amigurumi Ninja Turtle Free Pattern-1 yazısı ilk önce FREE AMİGURUMİ CROCHET üzerinde ortaya çıktı.

• Size USG6/4.00mm crochet hook
• Worsted weight yarn [I used Vanna’s Choice in Beige, Kelly Green(shell), Dusty Green(“belly”), and Fern(polka dots)]
• 9mm safety eyes
•  fiber fill
• stitch marker
• yarn needle

 ABBREVIATIONS

• st – stitch
• sc – single crochet
• inc – increase (2sc into stitch)
• dec – decrease (sc 2 stitches together)

HEAD
use beige yarn

Rnd 1:  6sc into magic ring
Rnd 2:  2sc into each st [12]
Rnd 3:  (sc, inc) repeat around [18]
Rnd 4:  sc around [18]
Rnd 5:  (2sc, inc) repeat around [24]
Rnd 6:  (3sc, inc) repeat around [30]
Rnd 7-10:  sc around [30]
Rnd 11:  (3sc, dec) repeat around [24]
Rnd 12:  (2sc, dec) repeat around [18]

Placement of eyes

**Using my picture as a guide, position your safety eyes and attach the backings at this point.  Also start stuffing the head.  If you wait until the end, the neck opening will be too small to comfortably stuff the head and it will definitely be too small to attach the backings to the eyes!  The head should be stuffed until it is nice and firm but you do not need to stuff the neck at all.**

Rnd 13:  (sc, dec) repeat around [12]
Rnd 14:  (sc, dec) repeat around [8]
Rnd 15-18: sc around [8]
Leave a long tail for attaching to head

SHELL
The shell is constructed from the top down.
use Kelly Green yarn

Rnd 1:  6sc into magic ring
Rnd 2:  2sc into each stitch [12]
Rnd 3:  (sc, inc) repeat around [18]
Rnd 4:  (2sc, inc) repeat around [24]
Rnd 5:  sc around [24]
Rnd 6:  (3sc, inc) repeat around [30]
Rnd 7:  (4sc, inc) repeat around [36]
Rnd 8:  (5sc, inc) repeat around [42]
Rnd 9:  sc around [42]
Rnd 10:  (6sc, inc) repeat around [48]
Rnd 11:  sc around [48]
Rnd 12:  (7sc, inc) repeat around [54]
Rnd 13:  sc around [54]
Rnd 14:  (8sc, inc) repeat around [60]
Rnd 15-16:  sc around [60]
Rnd 17:  (8sc, dec) repeat around [54]
Change to Fern yarn color
Rnd 18:  (7sc, dec) repeat around [48]
Rnd 19:  (6sc, dec) repeat around [42]
Rnd 20: (5sc, dec) repeat around [36]
Rnd 21:  (4sc, dec) repeat around [30]
Rnd 22:  (3sc, dec) repeat around [24]
Rnd 23:  (2sc, dec) repeat around [18]

**Stuff the shell at this point and make sure it is nice and firm before  you fasten off your stitches at the end.**

Rnd 24:  (sc, dec) repeat around [12]
Rnd 25:  (dec) repeat around [6]
Fasten off

FOOT (make 4)

Rnd 1:  6sc into magic ring
Rnd 2:  2sc into each st [12]
Rnd 3:  (sc, inc) repeat around [18]
Rnd 4:  (2sc, inc) repeat around [24]
Rnd 5-6:  sc around [24]
Rnd 7:  (2sc, dec) repeat around [18]
Rnd 8-10:  sc around [18]
Leave a tail for sewing onto body

TAIL

Rnd 1:  4sc into magic ring
Rnd 2:  2sc into each st [8]
Rnd 3:  (sc, inc) repeat around [12]
Rnd 4-5: sc around [12]
Leave a tail for attaching to body

POLKA DOTS (optional)

For my turtle, I made 3 different size polka dots and placed them randomly on the shell.

Large Polka Dot (I made one)

• Rnd 1:  6sc into magic ring
• Rnd 2:  2sc into each stitch [12]
• Rnd 3:  (sc, inc) repeat around [18]
• Rnd 4:  (2sc, inc) repeat around [24]
• Fasten off and leave a long tail for attaching

Medium Polka Dot (I made 3)

• Rnd 1:  6sc into magic ring
• Rnd 2:  2sc into each st [12]
• Rnd 3:  (sc, inc) repeat around [18]
• Fasten off and leave a long tail for attaching

Small Polka Dot (I made 5)

• Rnd 1:  6sc into magic ring
• Rnd 2:  2sc into each st [12]
• Fasten off and leave a long tail

ASSEMBLY

You have already stuffed your turtle’s head and body at this point.  Now it is time to attach the two together!  First, sew the neck opening closed.  Using the above pictures as guides, position the head and neck against the body and pin it into place.   You will need to sew the entire back of the neck onto the shell to maintain the upright posture of the head.  If you only sew the bottom of the neck in place, the head will be top-heavy and will just fall forward.

After the head is attached to the body, you are ready to attach the feet.  Pin each foot in place and make sure they are all symmetrical.  One by one, sew each foot to the underside of the shell.  Be patient and neat in making your stitches!  You want everything to come out smooth and nice!

More Amigurumi Turtle Ideas:

Amigurumi Little Turtle Free Pattern yazısı ilk önce FREE AMİGURUMİ CROCHET üzerinde ortaya çıktı.

Hello dear Amigurumi Followers
Today we share one free amigurumi crochet pattern again for you. As you know we share new amigurumi free patterns every day. The main crochets are amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi llama, amigurumi pigs, amigurumi bunny, amigurumi clowns, amigurumi lambs, amigurumi bees, amigurumi unicorns, amigurumi dolls, amigurumi foxes, amigurumi penguins, amigurumi dinosaurs, amigurumi elephants, amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more …
Todays daily new amigurumi free crochet pattern is Amigurumi Apple Turtle.
I want to give you some informations about this pattern ;

You Will Need:

1. Hook 2,3 mm (for crocheting turtle) and hook 1,5 mm for crocheting spots on turtle-shell;
2. 12 mm safety eyes;
3. Yarn А “Drops Paris” cotton 75 m/50 gr (color: 39 pistachio, I crocheted in one thread, expense – less than 1 skein);
4. Yarn В “Drops Muskat” mercerized cotton 100 m/50 gr (color: 24 medium grey, I crocheted in one thread, expense – less than 1 skein) ;
5. Yarn С “Drops Muskat” mercerized cotton 100 m/50 gr (color: 30 vanilla yellow, I crocheted in one thread, expense – less than 1 skein);
6. Black threads mouline (for embroidering smile, eyelashes, eyebrows and nose);
7. White threads mouline (for embroidery of eyes);
8. Pink threads mouline (for cheeks);
9. Dark-green threads mouline (for spots on shell);
10. Needles for cutting – with a bead on the end (for fixing parts before sewing);
11. 5 pins or 5 markers;
12. Yarn needle (thick needle with blunt end);
13. Synthepus for filling;
14. Needle;
15. Scissors;
16. Round-nose pliers;
17. Cotter pin T-shaped 25 х 2.0 mm;
18. Shim 3 х 20 mm;
19. Disk, diameter 20 mm. My finished toy was 10 cm (3,9 inches) high

Conventions:

l – loop;
sc – single crochet;
dc – double crochet;
sl st – slip stitch;
inc – increase;
dec – decrease;
(… l) – total number of loops in a round;
[…] xN – repeat what is indicated in round brackets N times.

Head (Yarn A)

1: 2 loops, 6sc in 2 nd loop from hook (amigurumi ring), sl st in 1 st sc (6l)
2: [inc]х6 (12l)
3: [sc, inc]х6 (18l)
4: [2sc, inc]х6 (24l)
5: [3sc, inc]х6 (30l)
6: [4sc, inc]х6 (36l)
7: [5sc, inc]х6 (42l)
8: [6sc, inc]х6 (48l)
9-13: 48sc (48l)
14: [6sc, dec]х6 (42l)
15: [5sc, dec]х6 (36l)
16: [4sc, dec]х6 (30l)
17: [3sc, dec]х6 (24l) Insert safety eyes between the rounds 11 and 12, the distance between them is approximately 10 stitches (see photo 1). Embroider a line of growth of eyelashes and cilia around the eyes with black threads of mouline (see photos 2-7). Embroider nose (see photo 8), eyebrows (see photos 9-12) and smile (see photos 13-16). Using a yarn needle to do around the eye «loose stitch» of white thread of mouline (see photos 17-
19). Separate one thread and fasten with a needle «loose stitch» from both sides (see photos 20-24).

Cheeks 2 pcs (Pink threads mouline)

1: 2 loops, 6sc in 2nd loop from hook (amigurumi ring), sl st in 1st sc (6l)

Cut and fix the thread, leaving a long end for sewing. Sew the cheeks to the head with the wrong side outward (see photos 25, 26, 27)

Start stuffing the head with synthepus and continue crocheting.
18: [2sc, dec]х6 (18l)
19: [sc, dec]х6 (12l)
Completely fill the head. Insert cotter pin into shim (see photo 28). Place cotter pin with shim in the hole head (see photo 29).
20: [dec]х6 (6l)
Trim the thread. Pass the thread through all the loops using a yarn needle. Tighten and secure (see photo 30).

Body (Yarn A)

1: 2 loops, 6sc in 2nd loop from hook (amigurumi ring), sl st in 1st sc (6l)
2: [inc]х6 (12l)
3: [sc,inc]х6 (18l)
4: 18sc (18l) Insert cotter pin in middle of body (see photo 31). Put the disk on cotter pin and wrap the ends in the “rings” with the help of round-nosed pliers (see photos 32-35).
5: [2sc, inc]х6 (24l)
6: 24sc (24l)
7: [3sc, inc]х6 (30l)
8-11: 30sc (30l)
12: [3sc, dec]х6 (24l) Start stuffing the body with synthepus.
13: [2sc, dec]х6 (18l)
14: [sc, dec]х6 (12l) Fill the body to the end.
15: [dec]х6 (6l) Trim the thread. Pass the thread through all the loops using a yarn needle. Tighten and secure (see photo 36).

Hands 2 pcs (Yarn A)

1: 3 loops, turning, 2sc (starting from the 2nd loop from the hook), 2sc (from the back of the chain) (4l) 2: [sc, inc]х2 (6l)
3-4: 6sc (6l) Slightly fill the hand with synthepus.
5: [sc, dec]х2 (4l) Trim the thread. Pass the thread through all the loops using a yarn needle. Tighten and secure.

Legs 2 pcs ( Yarn A )

1: 4 loops, turning, 3sc (starting from the 2nd loop from the hook), 3sc (from the back of the chain) (6l)

2: [2sc, inc]х2 (8l)

3: 8sc (8l)

4: [2sc, dec]х2 (6l)

5-6: 6sc (6l) Slightly fill the leg with synthepus.

7: [sc, dec]х2 (4l) Trim the thread. Pass the thread through all the loops using a yarn needle. Tighten and secure.

Turtle-Shell (Yarn B)

1: 2 loops, 6sc in 2nd loop from hook (amigurumi ring), sl st in 1st sc (6l)
2: [inc]х6 (12l)
3: [sc, inc]х6 (18l)
4: [2sc, inc]х6 (24l)
5: [3sc, inc]х6 (30l)
6: [4sc, inc]х6 (36l)
7: [5sc, inc]х6 (42l)
8: [6sc, inc]х6 (48l)
9: 48sc (48l)
10: [6sc,dec]х6 (42l)
11: 42sc (42l) – only through front loops

Spots (Dark-green threads Mouline)

Spots crochet with a hook 1,5 mm (see photo 38).
LITTLE (6 pcs) 1: 5 loops, turning, 4sc (4l)
2: 1l, turning, inc, 2sc, inc (6l)
3: 1l, turning, inc, 4sc, inc (8l)
Crocheting around anticlockwise. 4: 2sc down the side, 4sc straight, 2sc up the side, 8 sc straight (16l).
Cut and fix the thread, leaving a long end for sewing.
BIG (1 pcs) 1: 2 loops, 6sc in 2nd loop from hook (amigurumi ring), sl st in 1st sc (6l)
2: [inc]х6 (12l)
3: [sc, inc]х6 (18l)
4: [2sc, 2dc in the next loop]х6, sl st in 1st sc (24l)
Cut and fix the thread, leaving a long ed sewing.
Sew spots to the shell, pre-fixing them with needles for cutting (see photo 39).

Belly (Yarn C)

The belly crochets along rows.
1: 11 loops, turning, 10sc (starting from the 2nd loop from the hook) (10l)
2: 12 loops, turning, 1sc in the 13th loop from hook, 9sc (see photos 40-42)
3: 12 loops, turning, 1sc in the 13th loop from hook, 13sc (see photos 43-46)
4-6: 1 loop, turning, 18sc (18l) (see photo 47)
7: 12 loops, turning, 1sc in the 13th loop from hook, 17sc (see photos 48, 49)
8: 12 loops, turning, 1sc in the 13th loop from hook, 19sc (see photos 50, 51)
9: 1 loop, turning, 2sc, [dec]x2, 10sc, [dec]x2, 2sc (18l)
10: 1 loop, turning, 2sc, [dec]x2, 6sc, [dec]x2, 2sc (14l)
11: 1 loop, turning, 2sc, [dec]x2, 2sc, [dec]x2, 2sc (10l)
12: 1 loop, turning, 2sc, dec, 2sc, dec, 2sc (8l)
13: 1 loop, turning, sc, dec, 2sc, dec, sc (6l)
14: 1 loop, turning, dec, 2sc, dec (4l)

Crocheted the belly around the perimeter in a counter-clockwise direction from the point “Start” (see photo 52).

16: 6sc diagonally, 10sc around the loop, 6sc up, 8sc around the loop, 1sc in the corner, 10sc straight, 1sc in the corner, 8sc around the loop, 6sc down, 10sc around the loop, 6sc diagonally, 4sc straight (76l)

Cut and fix the thread, leaving a long end for sewing (see photo 53).

Divide 4sc at the bottom of belly in half, hang the central marker between the second and third sc (see photo 54). Count from him 16sc counterclock-wise and hang the second marker, then count 8sc and hang the third marker. Do the same on the other side of the belly (see photo 54).

Fold in half marked with markers 8 loops and sew them with elastic seam (see photos 55-59). Similarly sew 8 loops on the other side of the belly.

Remove all markers except the central. Count from him 2sc counterclock-wise and hang the second marker, then count 8sc and hang the third marker. Do the same on the other side of the belly (see photo 60).

Fold in half marked with markers 8 loops and sew them with elastic seam. Similarly sew 8 loops on the other side of the belly.

Assemblage

See photo 61. Sew your crocheted legs and hands to the body with a threaded bracing (use round-nosed pliers to make it easier to pull the needle). For this, it is necessary:

1. Outline the location of the hands (between 4 and 5 rounds of body, distance between hands approx 12 stitches) and legs (between 9 and 10 rounds of body, distance between legs approx 18 stitches) using needles for cutting (see photo 62).
2. Fasten a long thread from the inside of one leg (see photo 63). Pass the needle through the leg (see photo 64).
3. Insert the needle into the body at the leg attachment point (at the same time sewing a leg) and pull out on the opposite side, in the place where the second leg is fastened (see photo 65).
4. Pass the needle through the second leg (see photo 66).
5. Re-pass the needle through the body. The needle must go right through the leg, enter the place where it came from and go back to the place where the first leg was fastened while sewing it through (see photo 67). Pass the needle through the body in the same way in the opposite direction. And several more times to flash the body for strength.
6. Insert the needle in the leg and pull out it at the point of attachment of the opposite hand (see photo 68).
7. Pass the needle through the hand (see photo 69).
8. Insert the needle into the body at the hand attaching point (stitching his hand) and pull out on the opposite side, in the place of securing the second hand (see photo 70).
9. Pass the needle through the second hand (see photo 71).
10. Re-pass the needle through the body. The needle must go right through the hand, enter the place where you came from and go back to the place where the first hand was fastened, while sewing it through (see photo 72). Pass the needle through the body in the same way in the opposite direction. And several more times to flash the body for strength.
11. Lock and trim the thread.

Put the belly on the body so that the center marker is at the bottom. Count from him 16sc counterclockwise and hang the second marker. Do the same on the other side of the belly (see photo 73).

Sew the belly from the second and third marker to the turtle-shell. The needle is inserted through back loop, which are left from the crocheting 11 round of shell (see photos 74-78). Trim and fix the thread. Embrace your turtle (see photos 79-81).

Not :

This pattern is made by the design of Angelina Taranina and is intended only for personal use.

More Amigurumi Turtle Ideas:

Amigurumi Apple Turtle Free Pattern yazısı ilk önce FREE AMİGURUMİ CROCHET üzerinde ortaya çıktı.

MATERİALS

• Light gree and dark green yarn
• Beige and Brown color yarn
• White Felt
• 12-14 mm saffety eyes
• 2 mm hook
• Needle for sewing

FOOT (MAKE 4)

Start light green color yarn

1. 6 sc in magic ring (6)
2. 6 inc = 12
3. (1sc,1inc)*6 =18
4. (inc,2sc)*6 =24
5. blo(24 sc) =24
6. 7,8,9,10 =24sc

Cut the yarn

TOP SHELF

Start with dark green color yarn

1. 6sc in magic ring =6
2. 6inc =12
3. (sc,inc)*6=18
4. (inc,2sc)*6=24
5. (3sc,inc)*6=30
6. 2sc,inc,(4sc,inc)*5,2sc=36
7. (inc,5sc)*6=42
8. 3sc,inc,(6sc,inc)*5,2sc=48
9. (inc,5sc)*8=56
10. 56sc
11. 3sc,inc,(6sc,inc)*7,3sc=64
12. (7sc,inc)*8=72
13. 72sc
14. (inc,8sc)*8=80
15. (9sc,inc)*8=88
16. 5sc,inc,(10sc,inc)*7,5sc=96
17. 96sc
18. (11sc,inc)*8=104
19. 20,21. 104sc

BOTTOM SHELF

Start with light green color yarn

1. 6sc in Magic ring=6
2. 6inc=12
3. (sc,inc)*6=18
4. (inc,2sc)*6=24
5. (3sc,inc)*6=30
6. 2sc,inc,(4sc,inc)*5,2sc=36
7. (inc,5sc)*6=42
8. 3sc,inc,(6sc,inc)*5,3sc=48
9. (inc,5sc)*8=56
10. 3sc,inc,(6sc,inc)*7,3sc=64
11. (7sc,inc)*8=72
12. (inc,8sc)*8=80
13. (9sc,inc)*8=88
14. 5sc,inc,(10sc,inc)*7,5sc=96
15. (11sc,inc)*8=104
16. 17,18=104sc

HEAD

Start with light green color yarn

1. 6sc in magic ring=6
2. 6inc=12
3. (sc,inc)*6=18
4. (2sc,inc)*6=24
5. inc,sc,(3sc,inc)*5,2sc=30
6. (inc,4sc)*6=36
7. (5sc,inc)*6=42
8. 3sc,inc,(6sc,inc)*5,3sc=48
9. (7sc,inc)*6=54
10. (inc,8sc)*6=60
11. 12,13,14,15,16,17,18,19,20,21,22= 60sc (put saffety eyes rows 14 between 15 at the eyes distance 7sc)

23. 4sc,dec, (8sc,dec)*5,4sc=54
24. (7sc,dec)*6=48
25. 48sc
26. 3sc,dec,(6sc,dec)*5,3sc=42
27. 
28. 
29. 
30, 31,32,33,34,35,36 =24sc
37. (4dec,13sc,dec)=18
(please 5 dec in front of the head)
38,39,40 =18sc

TAİL

Start with light green color yarn

1. 4sc in magic ring=4
2. (sc,inc)*2=5
3. 6sc
4. (inc,sc)*3=9

HAT

1. 6sc in magic ring
2. 6inc =12
3. (sc,inc)*6=18
4. (inc,2sc)*6=24
5. 2sc,inc, (3sc,inc)*5,sc=30
6. 30sc
7. 30sc
8. 30sc
9. Flo(4sc,inc)*6=36
10. 36sc
11. (inc,5sc)*6=42
12. 42inverse sc

Amigurumi Cute Turtle Free Pattern yazısı ilk önce FREE AMİGURUMİ CROCHET üzerinde ortaya çıktı.